Clausing Industrial Logo
Meeting our customers' needs for quality
machine tool products since 1911
Call 800.323.0972
Clausing Distributor Locator (USA)

Clausing Industrial, Inc.
3963 Emerald Drive
Kalamazoo, MI 49001
Ph 800.323.0972
Fx 269.345.5945

Clausing Service Center
Ph 800.535.6553
Fx 269.342.7888

©2011 Clausing Industrial, Inc.
All Rights Reserved
Website Design by Creative Group

Products >  DrillsClausing/Ibarmia Geared-Drive, Prismatic Column Drills

[images/D/CIGHDF-model.jpg] Series F

Untitled Document

Standard Features…

  • Drilling capacity in steel: 1.38" (35mm) maximum
  • Drilling capacity in cast iron: 1.57" (40mm) maximum
  • Milling capacity in steel: 1.80" (45mm) maximum
  • Milling capacity in cast iron: 3.20" (80mm) maximum
  • Tapping capacity in steel: 1.18" (30mm) maximum
  • Tapping capacity in cast iron: 1.30" (33mm) maximum
  • 18 spindle speeds
  • Automatic feed reversing system for tapping on "RS" models
  • Adjustable vertical position of head by geared-motor
  • Head rotates 45° left or right of center
  • Large worktable with 3 T-slots
  • Hardened and ground high quality steel gears
  • Gear box lubrication by automatic pump
  • Guide ways lubricated by manual pump
  • Speed plate and selecting levers on front of head
  • High/low speed range selector
  • Coolant tank and pump in machine base
  • Co-ordinate cross slide table
  • Automatic feed and cut-off by electromagnetic clutch
  • Work light
  • Front hand wheel for fine feed work
  • Depth scale and adjustable depth stop
  • Built-in low voltage electrical equipment in column rear
  • Emergency STOP
  • Spindle turn selection switch
  • Drill guard with microswitch

View/Download Product Info For These Models (pdf)
View/Download Complete Product Line Catalog
View/Download Accessories Information (pdf)

Drilling-ClausingIbarmiaPrismaticColumn SpecsandDimensions
Clausing Ibarmia Prismatic Column Specifications and Dimensions
Standard Models
Auto feed reversing for tapping models
  Maximum drilling capacity in steel
1.38" (35mm)
  Maximum drilling capacity in cast iron
1.57" (40mm)
  Maximum milling capacity in steel
1.80" (45mm)
  Maximum milling capacity in cast iron
3.20" (80mm)
  Maximum tapping capacity in steel
1.18" (30mm)
  Maximum tapping capacity in cast iron
1.3" (33mm)
  Spindle taper
  Optional spindle taper (on request)
  Quill diameter
2.95" (75mm)
  Spindle travel (drilling depth)
7.87" (200mm)
  Main motor power
1.5/2 Hp (1.1/1.5Kw)
  Coolant pump motor power
.12 Hp (.09Kw)
  Head geared-motor power
.1 Hp (.07Kw)
  Number of speeds (see speed charts)
  Number of automatic feeds
  Auto feed range in./rev. (mm/rev.)
.0039/.0079/.118 (.1/.2/.3)
Dimensions and Weights
  Height (A)
81.9" (2130mm)
  Overall length (B)
57.1" (1450mm
  Spindle to table (C)
23.23" (590mm)
  Spindle center to column (D)
15.08" (383mm)
  Maximum head height (E)
94.5" (2400mm)
Worktable width (F)
14.17" (360mm)
  Worktable height (G)
35.43" (900mm)
  Worktable length (H)
47.24" (1200mm)
  Base width (I)
29.53" (750mm)
  Overall width (J)
61.81" (1570mm)
  X travel
27.56" (700mm)
  Y travel
14.17" (360mm)
  Net weight
2,756 lbs (1250Kg)
  Shipping weight
3,197 lbs (1450Kg)
  Shipping dimension (length x width x height)
67" x 67" x 95" (1.7x1.7x2.4m)
“RS” models are equipped with automatic feed reversing system for tapping.