Clausing Industrial Logo
Meeting our customers' needs for quality
machine tool products since 1911
Call 800.323.0972
Clausing Distributor Locator (USA)
OUR PRODUCTS
arrow

Clausing Industrial, Inc.
3963 Emerald Drive
Kalamazoo, MI 49001
Ph 800.323.0972
Fx 269.345.5945

Clausing Service Center
Ph 800.535.6553
Fx 269.342.7888

©2011 Clausing Industrial, Inc.
All Rights Reserved
Website Design by Creative Group


Products >  DrillsClausing Radial Drills

[images/D/RDCLC2500-model.jpg] Model CLC2500

Untitled Document

Standard Features…

  • Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
  • Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
  • Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
  • Coolant system
  • CSA Electrics Standard
  • Tool kit and manuals

View/Download Product Info For These Models (pdf)
View/Download Complete Product Line Catalog (pdf)

Drilling-ClausingRadialDrills All Models
Specifications and Dimensions
Model CLC2500
Working Area Drill Head
Column Sleeve Dia. (E)
21.65" (550mm)
Spindle Taper
6MT
Column Face to Spindle Center
Spindle Stroke
17.7" (450mm)
  Maximum (D+C)
98.4" (2500mm)
Quill Diameter
3.94" (100mm)
  Minimum (D)
19.7" (500mm)
Number of Spindle Speeds
16
Spindle Head Travel (C)
78.7" (2000mm)
Spindle Speeds (rpm)
16-1250
Base Surface to Spindle End
Number of Steps
16
  Maximum (A)
78.7" (2000mm)
Spindle Feed Rate (in(mm)/rev.)
0.0015"(.04mm)-0.126"(3.20mm)
  Minimum (B)
21.6" (550mm)
Spindle Drive Motor (2-speed)
10 hp (7.5 Kw)
Arm Vertical Travel (A-B)
39.4" (1000mm)
Elevating Motor
5 hp (3.6 Kw)
Arm Rotation (Right & Left)
180°
Coolant Pump Motor
1/4 hp (.18 Kw)
Baseplate Working Surface
86.8" x 43.4" (2205 x 1102mm)
 
Box Table Area
Capacities
  Length (L)
39.4" (1000mm)
Drilling In Steel
3.15" (80mm)
  Width (K)
31.5" (800mm)
Drilling In Cast Iron
3.98" (100mm)
  Height (H)
22" (560mm)
Tapping In Steel
2.56" (65mm)
Base Dimensions
Tapping In Cast Iron
2.95" (75mm)
Floor Area (R x S)
138.6" x 55.1" (3520 x 1400mm)
Boring In Steel
6" (150mm)
Height (Q)
12.6" (320mm)
Boring In Cast Iron
10" (250mm)
   
Dimensions/Weights
Max. Machine Height (F)
157" (3990mm)
 
Base and Column Height (G)
151.6" (2660mm)
Shipping Dimensions
(L x W x H)
158" (4000mm) x
63" (1600mm) x 151.6" (3850mm)
Net Weight
24,250 lbs. (11000kg)
Shipping Weight
27,557 lbs. (12500kg)