Clausing Industrial | | Clausing Standard Bed Mills

Products > > Clausing Standard Bed Mills

[images/M/CSBM-model.jpg] Clausing Standard Bed Mills

Untitled Document

Standard Features…

Powerful 5 Hp spindle drive motor
Mechanical variable speed drive with 2 speed ranges
Hardened and ground spindle with NT40 taper
Hardened and chromed quill with 5" travel
CP4 ABEC7 angular contact spindle bearings
C7 double nut X/Y/Z axes 1.26" diameter ballscrew
Hardened and ground table surface
Ground T-slots to provide accurate reference edge
Hardened and ground, square X/Y ways
Turcite B coating on saddle X/Y axes ways
Meehanite castings for superior rigidity and wear resistance
Stainless steel front Y axis way cover
Rubber Z axis and rear Y/Z axes way covers
Automatic lubrication with alarm with alarm
Transformer
Long arm halogen work light
Coolant system with pump
Tools, toolbox and parts

View/Download Complete Product Line Catalog (pdf)

Untitled Document Clausing Standard Bed Mills

Specifications
Models	4BVS40	SUP4BVS40	6BVS40	SUP6BVS40	SUP8BVS40
Table Size	10" x 54" (254x1371mm)	10" x 54" (254x1371mm)	15" x 60" (380x1524mm)	15" x 60" (380x1524mm)	16.75" x 62" (425x1575mm)
Table Load Capacity	1,500 lbs. (680kg)	1,500 lbs. (680kg)	1,800 lbs. (817kg)	1,800 lbs (817kg)	2,000 lbs (907kg)
Number of T-Slots	3	3	3	3	4
T-Slot Width	.63" (16mm)	.63" (16mm)	.709" (18mm)	.709" (18mm)	.709" (18mm)
T-Slot Center Distance	2.48" (63mm)	2.48" (63mm)	3.15" (80mm)	3.15" (80mm)	3.15" (80mm)
Table Ways (X Axis) Turcite B coated	Dovetail	Dovetail	Dovetail	Dovetail	Dovetail
Bed Ways (Y Axis) Turcite B coated	Square	Square	Square	Square	Square
Column Ways (Z Axis)	Square	Square	Square	Square	Square
TRAVELS
Longitudinal (X Axis)	30.51" (775mm)	30.51" (775mm)	41.34" (1050mm)	41.34" (1050mm)	47.24" (1200mm)
Cross (Y Axis)	17.52" (445mm)	17.52" (445mm)	19.69" (500mm)	19.69" (500mm)	22.83" (580mm)
Vertical (Z Axis)	19.69" (500mm)	19.69" (500mm)	23.62" (600mm)	23.62" (600mm)	23.62" (600mm)
Quill Diameter	4.13" (105mm)	4.13" (105mm)	4.13" (105mm)	4.13" (105mm)	4.33" (105mm)
Quill Travel	5" (127mm)	5" (127mm)	5" (127mm)	5" (127mm)	6" (127mm)
Head Tilt (left or right)	90°	90°	90°	90°	90°
Feedrate X & Y Axes	.71-31 (in/min) (18-788mm/min)	.71-31 (in/min) (18-788mm/min)	1.1-43.3 (in/min)(28-1100mm/min)	1.1-43.3 (in/min) (28-1100mm/min)	1.1-43.3 (in/min) (28-1100mm/min)
Feedrate Z Axis	.71-31 (in/min) (18-788mm/min)	.71-31 (in/min) (18-788mm/min)	.71-31 (in/min) (18-788mm/min)	.71-31 (in/min) (18-788mm/min)	.71-31 (in/min) (18-788mm/min)
X & Y Axes AC Motor with Brake	1/2 Hp	1/2 Hp	1 Hp	1 Hp	1 Hp
Z Axis AC Motor with Brake	1/2 Hp	1/2 Hp	1/2 Hp	1/2 Hp	1/2 Hp
SPINDLE
Motor	5 Hp (mechanical V.S.)	5 Hp (Inverter V.S.)	5 Hp (mechanical V.S.)	5 Hp (Inverter V.S.)	7.5 Hp (Inverter V.S.)
Spindle Speeds (Infinitely Variable)	70-4300 rpm	65-5160 rpm	70-4300 rpm	65-5160 rpm	70-4300 rpm
No. of Speed Ranges	2	2	2	2	2
Low Gear Range	70-500 rpm	65-590 rpm	70-500 rpm	65-590 rpm	70-500 rpm
High Gear Range	570-4300 rpm	575-5160 rpm	570-4300 rpm	575-5160 rpm	570-4300 rpm
Spindle Taper	NT 40	NT 40	NT 40	NT 40	NT 40
Quill feed in/revolution (mm/revolution)	.0016/.003/.006 (0.04/0.08/0.015)	.0016/.003/.006 (0.04/0.08/0.015)	.0016/.003/.006 (0.04/0.08/0.015)	.0016/.003/.006 (0.04/0.08/0.015)	.0016/.003/.006 (0.04/0.08/0.015)
CONSTRUCTION
Height	78.74" (2000mm)	78.74" (2000mm)	85.43" (2170mm)	85.43" (2170mm)	84.65" (2150mm)
Working Width	71.46" (1815mm)	71.46" (1815mm)	92.91" (2360mm)	92.91" (2360mm)	98.03" (2490mm)
Working Depth	66.14" (1680mm)	66.14" (1680mm)	76.77" (1950mm)	76.77" (1950mm)	80.71" (2050mm)
Width Across Column Ways	11.73" (298mm)	11.73" (298mm)	11.73" (298mm)	11.73" (298mm)	11.73" (298mm)
Length of Saddle on Bed	25.98" (600mm)	25.98" (600mm)	47.24" (1200mm)	47.24" (1200mm)	53.15" (1350mm)
Width Across Bed Ways	16.53" (420mm)	16.53" (420mm)	20.47" (520mm)	20.47" (520mm)	22.83" (580mm)
Spindle Nose to Table	3.15"-22.83" (80-580mm)	3.15"-22.83"	3.93"-27.55" (100-700mm)	3.93"-27.55"	3.93"-27.55"
Center of Spindle to Column ways	17.32" (440mm)	17.32" (440mm)	20.47" (520mm)	20.47" (520mm)	23.62" (600mm)
Floor to Table Surface	36.2" (920mm)	36.2" (920mm)	37" (940mm)	37" (940mm)	34.3" (871mm)
Table to Column Ways	3.15"-20.87" (80-530mm)	3.15"-20.87" (80-530mm)	2.05"-21.73" (52-552mm)	2.05"-21.73" (52-552mm)	.79"-23.62" (20-600mm)
Ball Screw Dia./Pitch	1.26"/.2" (32/5mm)	1.26"/.2" (32/5mm)	1.26"/.2" (32/5mm)	1.26"/.2" (32/5mm)	1.26"/.2" (32/5mm)
Ball Screw Class	C7	C7	C7	C7	C7
Gross Weight (approximately)	4,400 lbs (2000kg)	4,400 lbs (2000kg)	6,600 lbs (3000kg)	6,600 lbs (3000kg)	7,260 lbs (3300kg)