8026J - Clausing/Colchester Manual Engine Lathe 13” Swing over Bed, Geared Head Gap Bed Engine Lathe
13” Swing over bed, Geared Head Gap Bed Engine Lathe, 3 Hp Spindle motor, 25” between centers, 8.26” Swing over the cross slide, 40 to 2500 RPM, 12 Speed, 1.57” Spindle Bore, D1-4 camlock spindle nose, 1.63” Tailstock quill diameter with 3 morse taper bore, Inch/Metric threading with various pitch settings, 230/460 Volts, 3 Phase
Need Help!! Call Us Now!! 1-800-323-0972
Features and Benefits:
Clausing/Colchester geared head lathes are the industry standard. The quality built into every machine translates into real long term performance for your application. The removable gap plate allows for large face plates to be mounted onto the spindle nose for various turning applications. Rugged construction, consistent quality in design and production, along with human engineering makes the operator more efficient, making this lathe a cost effective investment. You will get unbelievable machine performance and operational longevity with the Clausing/Colchester Geared Head Lathes.
Geared head lathes use a belt drive system from the motor to gearbox head. Speed changes are then selected by shifting gear levers into a certain configurations recorded on a legend plate.
Three phase voltage refers to three individual lines that connect to and run voltage through the motor. Each line alternates in a sequence as it reaches its voltage peak. This provides for a more stable flow of voltage and more horsepower to the machine.
Specifications
| Machine Style | Engine Lathe |
| Spindle Speed Control | Geared Head |
| Spindle (Hp) | 3 |
| Swing Over Bed (inch) | 13 |
| Swing Over Cross slide (inch) | 8.26 |
| Swing in Gap (inch) | 18.8 |
| Distance Between Centers (inch) | 25 |
| Bed Width (inch) | 8 |
| Spindle Bore (inch) | 1.57 |
| Spindle Nose (camlock) | D1-4 |
| Spindle Nose Taper | 3 MT |
| Number of Spindle Speeds | 12 |
| Spindle Speed RPM Range | 40-2500 |
| Cross Slide Travel (inch) | 7.5 |
| Width of Cross Slide (inch) | 5.5 |
| Top Slide Travel (compound) (inch) | 3.63 |
| Tailstock Quill Diameter (inch) | 1.63 |
| Tailstock Quill Travel (inch) | 4.38 |
| Tailstock Quill Taper | 3 MT |
| Longitudinal Feed Range (in/rev) | 0.001 – 0.080 |
| Cross Feed Range (in/rev) | 0.0005 – 0.040 |
| Number of Inch Pitches | 35 |
| Range of Inch Pitches | 2 - 56 |
| Number of Metric Pitches | 39 |
| Range of Metric Pitches | 0.2 - 14 |
| Number of Diametral Pitches | 18 |
| Range of Diametral Pitches | 8 - 56 |
| Number of Module Pitches | 18 |
| Range of Module Pitches | 0.2 – 3.5 |
| Coolant System | Yes |
| Voltage Required | (220) 230/460 |
| Phase | (1) 3 |
| Machine Foot Print (LxWxH) (inch) | 59 x 51 x 35 |
| Machine Weight (lbs.) | 1,562 |
Machine Features:
- 25” between center distance
- 13” Swing over bed
- Fully-Geared headstock with 12 spindle speeds ranging from 40 to 2500 RPM
- All headstock gears are hardened and ground
- Headstock shafts are splined and turn on anti-friction bearings
- Spindle bearings, gears, and shafts are lubricated by a forced lubrication system
- A broad range of feed and thread selections are available by using three selector levers and an 8 position rotary dial
- Cross slide runs along a dovetail guide
- Precision tapered roller spindle bearings
- Bed wipers and apron mounted one-shot lubrication pump
- The fabricated base is totally enclosed and splash bath lubricated
- Electromagnetic spindle brake
- Equipped with chuck guard, full splash guard, and leadscrew cover
- Able to reverse leadscrew while chuck is turning for faster thread cutting
- A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service