BF35 - Clausing Iberdrill 30.7” Prismatic Column Floor Drill Press Gear Head Drive, Co-ordinate Cross Table
Clausing Iberdrill 30.7” Prismatic Column Floor Drill Press Gear Head Drive, Co-ordinate Cross Table, 113 - 2670 RPM by 16 speed gear box, 2.95” diameter quill, 4MT taper spindle, Electromagnetic clutch quill feed, 2 hp 2 speed spindle motor, 1.38” drill capacity steel, 230/460 volt 3 Phase voltage
Need Help!! Call Us Now!! 1-800-323-0972
Features and Benefits:
Clausing IberDrill Gear Head Drive Drill Press with state or the art technology, allows you to select the best rpm for the tool with step speed shift levers. 16 speeds 113 - 2670 rpm combined with 2 Hp spindle motor give excellent torque for drilling large holes, small holes to spot-face, counter-bore and ream. Co-ordinate cross table with X-travel 27.5 “ and Y travel 14.17 give easy part set up and production runs. Electromagnetic clutch quill feed, with capacity production rated 1.38” in steel 1.57” in cast iron, Adding to the end of the model number “RS” adds the automatic tapping feature to this drill press. By setting a limit stop once the quill reaches this the spindle will automatically reverse. Drilling head tilts left or right 45 degrees for angle drilling. 230 or 460 volt 3 phase voltage.
Specifications
| Machine Style | Prismatic Column Floor Drill W/Co-ordinate Cross Table |
| Drive Type | Gear Head Drive |
| Number of Speed Steps | 16 |
| Spindle Speeds (RPM) | 113 – 162 – 226 – 248 – 324 – 363 – 417 – 496 – 597 726 – 834 – 912 – 1194 – 1335 – 1824 - 2670 |
| Column to Spindle Center (in) | 15.35 |
| Spindle Nose | 4MT |
| Spindle Travel (in) | 7.87 |
| Quill Feed | Electromagnetic Clutch |
| 3 Feed Ranges (in/rev) | 0.0039, 0.0079, 0.0094 |
| Spindle to Work Surface Min/Max. (in) | 0 / 23.23 |
| Column Head Elevation | Motorized |
| Co-ordinate Table Surface (in) | 48 x 14.17 |
| Work Table T-Slots (in) | 5/8 |
| Base Size (in) | 57.1 x 29.53 |
| Drill Capacity with Manual Feed (in) | 1.38 |
| E-Stop Switch | Yes |
| Voltage | 230 or 460 |
| Phase | Three |
| 2 Speed Motor Horsepower | 2 |
| Machine Weight (lbs.) | 2,756 |
| Machine Dimensions (WxDxH in) | 61.8 x 57.1 x 81.9 |
| Shipping Weight (lbs.) | 3,197 |
| Shipping Dimensions (LxWxD in) | 66 x 66 x 99 |
Machine Features:
- Gear head drive with shift levers on the face of the drill
- Gear box lubrication by automatic pump
- Hardened and Ground high quality steel gears
- Head elevation by geared motor
- Drill head tilts left/right 45 degrees
- 2 Hp 2 speed spindle motor
- Built in low voltage electrical equipment
- Depth scale and adjustable depth stop
- Electromagnetic clutch quill feed system
- Co-ordinate X/Y work table X travel – 27.5”, Y travel – 14.17”
- Work light
- Manual spindle reversing switch
- “RS” Models are equipped with automatic spindle reversing system for tapping
- Coolant tank and pump in machine base
- Safety drill guard with microswitch
- Automatic tool ejector
- Emergency stop button
- CE mark