BX40 - Clausing Iberdrill 27.56” Floor Drill Press - Gear Head Drive, Adjustable Work Table and Base
Clausing Iberdrill 27.56” Floor Drill Press Gear Head Drive, Adjustable Work Table and Base, 158 - 2222 RPM by 9 speed gear box, 2.95” diameter quill, 4MT taper spindle, electromagnetic clutch quill feed, 3 hp spindle motor, 1.57” drill capacity steel, 230/460 volt 3 Phase voltage
Need Help!! Call Us Now!! 1-800-323-0972
Features and Benefits:
Clausing IberDrill Gear Head Drive Drill Press with state or the art technology, allows you to select the best rpm for the tool with step speed shift levers. 9 speeds 158 - 2222 rpm combined with 3 Hp spindle motor give excellent torque for drilling large holes, small holes to spot-face, counter-bore and ream. Electromagnetic clutch quill feed, with capacity production rated 1.57” in steel 1.77” in cast iron, Adding to the end of the model number “RS” adds the automatic tapping feature to this drill press. By setting a limit stop once the quill reaches this the spindle will automatically reverse. 230 or 460 volt 3 phase voltage.
Specifications
| Machine Style | Floor Drill W/Adjustable Table |
| Drive Type | Gear Head Drive |
| Number of Speed Steps | 9 |
| Spindle Speeds (RPM) | 158 – 233 – 332 – 383 – 559 – 799 – 1060 – 1555 - 2222 |
| Column to Spindle Center (in) | 13.78 |
| Spindle Nose | 4MT |
| Spindle Travel (in) | 7.09 |
| Quill Feed | Electromagnetic Clutch |
| 3 Feed Range (in/rev) | 0.0039, 0.0079, 0.0118 |
| Spindle to Work Surface Min/Max. (in) | 1.97 / 27.2 |
| Column Diameter (in) | 5.91 |
| Adjustable Table Surface (in) | 18.9 x 22.05 |
| Work Table T-Slots (in) | 1/2 |
| Base Size (in) | 31.5 x 18.8 |
| Drill Capacity with Manual Feed (in) | 1.57 |
| E-Stop Switch | Yes |
| Voltage | 230 or 460 |
| Phase | Three |
| Motor Horsepower | 2 |
| Machine Weight (lbs.) | 1,081 |
| Machine Dimensions (WxDxH in) | 20 x 38 x 76.8 |
| Shipping Weight (lbs.) | 1,190 |
| Shipping Dimensions ships laying down (LxWxD in) | 92 x 24 x 43.3 |
Machine Features:
- Gear head drive with shift levers on the face of the drill
- Gear box lubrication by automatic pump
- Hardened and Ground high quality steel gears
- 3 Hp spindle motor
- Built in low voltage electrical equipment
- Depth scale and adjustable depth stop
- Electromagnetic clutch quill feed system
- Adjustable work table
- Work light
- Manual spindle reversing switch
- “RS” Models are equipped with automatic spindle reversing system for tapping
- Thermomagnetic motor breaker switch
- Machined base with coolant tank
- Safety drill guard with microswitch
- Automatic tool ejector
- Emergency stop button
- CE mark