CL1600H - Clausing Radial Drill 62.2” Arm, 27.6 x 19.7 x 15.9 Box Table, 2.6” Drilling Capacity Steel
62.2” Arm, 27.6 x 19.7 x 15.9 Box Table, 2.6” Drilling Capacity Steel, 1.97” Tapping Capacity Steel, 7.5 Hp Spindle Motor, W/CE Electrics, Spindle Guard, 6 – Speed Geared Head, 36 to 1890 rpm Spindle Speed, Self-Contained Coolant System, 230/460 Volts 3 Phase
Need Help!! Call Us Now!! 1-800-323-0972
Features and Benefits:
Radial Arm Drills allow for drilling and boring small to massive holes in large oversize work pieces. Clausing’s Radial Drill design allow for the spindle head to move along the length of the arm and the arm height to be adjusted and rotated. This allows for precise drilling along many angles. Special spindle balance mechanism, superior to a traditional balance mechanism extends Balance Spring life.
Hardened and Ground steel gears, double walled column, large bearing surface for easy arm rotation, hardened steel wear strips for excellent head travel, power spindle feeds with an efficient coolant system, make Clausing Radial Drills your choice for the tough jobs.
Clausing radial arm drill presses can be NRTL certified upon request. Large Auxiliary Box Table included
Specifications
| Machine Style | Radial Arm Drill |
| Drive Type | Geared Head |
| Number Spindle Speeds | 6 |
| Spindle Speeds (RPM) | 36-1890 |
| Column to Spindle Center Min-Max (in) | 17.3 to 62.2 |
| Spindle Head Travel (in) | 44.9 |
| Arm Elevation Travel (in) | 48 |
| Spindle Nose Taper | 5 MT |
| Spindle Travel (in) | 14.6 |
| Column Diameter (in) | 17 |
| Base Surface to Spindle Nose Min-Max (in) | 15 to 63 |
| Auxiliary Box Table Dimensions (LxWxH in) | 27.6 x 19.7 x 15.9 |
| Base Working Surface (in) | 97.6 x 41.3 |
| Number Of Feeds | 6 |
| Feed Rate in/rev | 0.003 – 0.038 |
| Drill Capacity Steel (in) | 2.6 |
| Drill Capacity Cast Iron (in) | 2.75 |
| Tapping Capacity Steel (in) | 1.97 |
| Tapping Capacity Cast Iron (in) | 2.36 |
| Voltage | 230 or 460 |
| Phase | 3 |
| Coolant System | Yes |
| Spindle Motor Horsepower | 7.5 |
| Arm Elevation Horsepower | 2 |
| Clamping Motor Horsepower | 1 |
| Coolant Pump Horsepower | 1/8 |
Machine Features:
- Limit safety switch for safe operation
- High speed gears are made of Nickel-Chrome Steel and are heat-treated and ground for durability
- Powerful 7.5 hp spindle drive motor for heavy-duty cutting
- Equipped with hydraulic separate clamping unit. Vertical movement of ar is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
- Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
- Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
- Special automatic tool eject device is supplied to allow you to change tools quickly (No drifter required)
- Special spindle balance mechanism, superior to traditional balance mechanism and extends Balance Spring life
- Coolant System
- Low volt and overload protection
- Tool kit and manuals
- 27.6” x 19.7” x 15.9” Auxiliary Box Table
- CE Electrics (Spindle Guard & UL Safety Door)
- 230 or 460 volt 3 phase standard voltage, other voltages may require a transformer or special order