KM25EV - Clausing Iberdrill 19.68” Bench Drill Press - Variable Speed Belt Drive Adjustable Work Table and Base
Clausing Iberdrill 19.68” Bench Drill Press Variable Speed Belt Drive Adjustable Work Table and Base, 295 – 4800 RPM electronic inverter, 2.44” diameter quill, 3MT taper spindle, manual quill feed, 1 ½ hp spindle motor, 1” drill capacity steel, 230/460 volt 3 Phase voltage
Need Help!! Call Us Now!! 1-800-323-0972
Features and Benefits:
Clausing IberDrill Belt Drive Drill Press with state or the art technology, allows you to select the best rpm for the tool with easy to use potentiometer dial. Electronic inverter 300 - 4800 rpm for drilling large holes, small holes to spot-face, counter-bore and ream. The variable speed drive delivers torque for capacity production rated 1” in steel 1.18” in cast iron, Adding to the end of the model number “RS” adds the automatic tapping feature to this drill press. By setting a limit stop once the quill reaches this the spindle will automatically reverse. 230 or 460 volt 3 phase voltage.
Specifications
| Machine Style | Bench Drill W/Adjustable Table |
| Drive Type | Electronic Inverter Belt Drive |
| Number of Speed Steps | Infinitely |
| Spindle Speeds (RPM) | 300 - 4800 |
| Column to Spindle Center (in) | 9.84 |
| Spindle Nose | 3MT |
| Spindle Travel (in) | 4.72 |
| Quill Feed | Manual |
| Spindle to Work Surface Min/Max. (in) | 4.33 / 19.7 |
| Column Diameter (in) | 3.94 |
| Adjustable Table Surface (in) | 10.6 x 11.8 |
| Work Table T-Slots (in) | 1/2 |
| Base Size (in) | 22 x 15 |
| Drill Capacity with Manual Feed (in) | 1 |
| E-Stop Switch | Yes |
| Voltage | 230 or 460 |
| Phase | Three |
| Motor Horsepower | 1 1/2 |
| Machine Weight (lbs.) | 364 |
| Machine Dimensions (WxDxH in) | 20 x 32 x 47.6 |
| Shipping Weight (lbs.) | 419 |
| Shipping Dimensions ships laying down (LxWxD in) | 57 x 24 x 36 |
Machine Features:
- Belt Drive – electronic inverter
- Depth scale and adjustable depth stop
- Adjustable work table
- Work light
- Manual spindle reversing switch
- “RS” Models are equipped with automatic spindle reversing system for tapping
- Thermomagnetic motor breaker switch
- Low voltage electric equipment
- Safety drill guard with microswitch
- Automatic tool ejector
- Emergency stop button
- CE mark
- Optional base cabinets available