2500U - Clausing Universal Mill has both a Vertical and Horizontal Milling Spindle. 59” Long x 13.7” Wide Table
Need Help!! Call Us Now!! 1-800-323-0972
Features and Benefits:
Clausing Universal Mills have vertical and horizontal spindles are heavy-duty, reliable, versatile, and extremely accurate. These heavy cast iron mills can be used for one-off pieces, small and large production runs, making them ideal for maintenance tool rooms, job shops, or tool and die shops. A wide range of spindle speeds combined with infinitely variable feed rates make cutting ferrous and non-ferrous materials highly efficient.
Clausing Universal Mills are designed, and built for accuracy featuring Meehanite cast iron, and hardened and ground alloy steel. Main spindle is mounted using high accurate spindle bearings. Extra heavy-duty saddle travels on hardened and ground square ways capable of handling table loads up to 1,540 lbs. Large hardened and ground work table with 5 T-slots.
Three phase voltage refers to three individual lines that connect to and run voltage through the motor. Each line alternates in a sequence as it reaches its voltage peak. This provides for a more stable flow of voltage and more horsepower to the machine.
Specifications
| Machine Style | Universal Mill |
| Spindle Speed Control Vertical Spindle | 12 |
| Spindle Speed Control Horizontal Spindle | 12 |
| Spindle Motor Horsepower Vertical | Driven from Horizontal SPDL |
| Spindle Motor Horsepower Horizontal | 7.5 |
| Table Size (inch) | 13.7 x 59 |
| Table Load Capacity (lbs.) | 1,540 |
| T-Slot Width (in) | .629 |
| T-Slot Center Distance (inch) | 2.36 |
| Number T-Slots | 5 |
| X - Longitudinal Travel Manual (inch) | 45.27 |
| Y - Cross Travel Manual (inch) | 15.74 |
| Z - Knee Travel Manual (inch) | 19.68 |
| Distance from Spindle to Overarm (inch) | 6.1 |
| Horizontal Spindle Taper | NT 40 |
| Horizontal Diameter of Main Shaft Nose (inch) | 3.5 – 5.06 |
| Milling Arbor (inch) | 1 |
| Horizontal Number of Spindle Speeds | 12 |
| Horizontal Spindle Speed Range (RPM) | 48 - 2160 |
| Vertical Spindle Taper | NT 40 |
| Vertical Quill Diameter (inch) | 4.92 |
| Vertical Quill Travel (inch) | 3.94 |
| Vertical Number Spindle Speeds | Driven from Horizontal SPDL |
| Vertical Spindle Speed Range (RPM) | 48 - 2160 |
| Longitudinal and Crossfeed Feed Range (in/min) | 0.393 – 47.55 |
| Vertical Feed Range (in/min) | 0.196 – 23.77 |
| Feed Motor Horsepower | 2.5 |
| Rapid Traverse X and Y (in/min) | 47.55 |
| Rapid Traverse Vertical Z (in/min) | 23.77 |
| Coolant System | Yes |
| Coolant Pump Horsepower | 1/8 |
| Voltage Required | 230 or 460 |
| Phase | 3 |
| Machine Weight (lbs.) | 7,040 |
| Machine Foot Print (WxDxH) (inch) | 70 x 89 x 88 |
| Shipping Weight (lbs.) | 7,770 |
Machine Features:
- X, Y & Z Infinitely variable speed is achieved by an inverter through the gear box and controlled at the operator friendly control panel
- Rapid traverse on X, Y & Z axis
- Variable speed on X, Y & Z axis
- High quality meehanite casting for superior rigidity and wear resistance
- All gears and shafts are hardened and ground
- Large 13.7” x 59” (350 x 1500mm) table with 5 T-slots (Optional 13.7” x 72.8”)
- Table swivels 45° left and right
- Huron swivel head on ram with manual moving quill
- Extra large square and dovetail square slide ways for greater accuracy
- 27mm ONG horizontal milling arbor & two (2) supports (“carrier bearing”)
- All slide ways and table are hardened and ground
- Turcite coated Y axis for wear resistance
- Double clamps on all square slide ways
- Motorized overarm with a 5.5 Hp motor
- Horizontal & vertical manual drawbars
- Automatic coolant system and coolant pump
- Tool box and service tools
- Standard 230 or 460 3 Phase (other voltages require a transformer or special order)
- A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service