V350 – Clausing/Harrison Lathe 13.75” Swing over Bed, 3 Gear Infinitely Variable Speed Gap Bed Engine Lathe

Model Number#:

V350

Price: Request a Quote

Clausing/Harrison

13.75” Swing over bed, 3 Gear Infinitely Variable Speed Gap Bed Engine Lathe, 10 Hp Spindle motor, 25” between centers, 7.75” Swing over the cross slide, 15 to 3250 RPM, 1.65” Spindle Bore, D1-4 camlock spindle nose, 2.48” Tailstock quill diameter with 4 morse taper bore, Inch/Metric threading with various pitch settings, 230/460 Volts, 3 Phase

Need Help? Call Us Now!

  • 269-241-9274

Specifications

Machine Style Engine Lathe
Spindle Speed Control Variable Speed
Spindle (Hp) 10
Swing Over Bed (inch) 13.75
Swing Over Cross slide (inch) 7.75
Swing in Gap (inch) 21
Distance Between Centers (inch) 25
Bed Width (inch) 12.5
Spindle Bore (inch) 1.65
Spindle Nose (camlock) D1-4
Spindle Nose Taper 3 MT
Number of Spindle Speeds 3 infinitely variable
Spindle Speed RPM Range 15-3250
Cross Slide Travel (inch) 9.8
Width of Cross Slide (inch) 7.09
Top Slide Travel (compound) (inch) 5.5
Tailstock Quill Diameter (inch) 2.48
Tailstock Quill Travel (inch) 5.5
Tailstock Quill Taper 4 MT
Longitudinal Feed Range (in/rev) 0.0014 – 0.048
Cross Feed Range (in/rev) 0.0007 – 0.024
Number of Inch Pitches 56
Range of Inch Pitches 2 – 56
Number of Metric Pitches 20
Range of Metric Pitches 0.2 – 14
Number of Diametral Pitches 20
Range of Diametral Pitches 8 – 56
Number of Module Pitches 51
Range of Module Pitches 0.2 – 3.5
Coolant System Yes
Voltage Required 230/460
Phase 3
Machine Foot Print (LxWxH) (inch) 75 x 51 x 44
Machine Weight (lbs.) 2,970

Machine Features:

  • 25” between center distance
  • 13.75” Swing over bed
  • 3 Speed Infinitely Variable Speed headstock with speeds ranging from 15 to 3250 RPM
  • All headstock gears are hardened and ground
  • Headstock shafts are splined and turn on anti-friction bearings
  • Spindle bearings, gears, and shafts are lubricated by a forced lubrication system
  • A broad range of feed and thread selections are available by using three selector levers and an 8 position rotary dial
  • Cross slide runs along a dovetail guide
  • Precision tapered roller spindle bearings
  • Bed wipers and apron mounted one-shot lubrication pump
  • Cast Iron Plinths with full length splash guard and traveling chip guard
  • Dynamic spindle brake via the inverter
  • Equipped with chuck guard, full splash guard, and leadscrew cover
  • Able to reverse leadscrew while chuck is turning for faster thread cutting
  • Extra wide bed provides accuracy and minimal wear
  • Carriage ways coated with “Moglice” PTFE for minimal bed wear and longer machine life
  • A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service

Recently Viewed Items